How to create a Windows 10 bootable USB, is a topic that is something fascinating for many of us, since being able to create a Windows 10 bootable USB would make things much easier for us in case we have to do something repair on our computer that does not start. However, there are probably some who still do not fully understand what a bootable USB is? Or what is it for? So before starting with how to create FAT32 bootable USB Windows 10. The main topic is to teach you how to create one. We are going to give you a little information about what it is and what we can use it for. Thus, you will understand how great and useful it is to have one with us.
Ok, first thing, what is a bootable USB? Well, it is something very simple, the bootable USB is a simple USB device that we have configured to act as our operating system when connecting it to our computer instead of the original operating system that we have installed on the hard disk of our CPU, and how does this work? Well, what makes this possible is that we use the USB device as a substitute for the hard disk, and we install a version of the operating system of our preference in this case Windows 10, in this way we can use the same functions and features that we normally use on our computer since it is basically the same. Only now you would have a portable operating system, which you can use on any other computer instantly just by connecting the USB.
This type of bootable USB is especially useful, when the computer’s operating system has a fault or problem and does not allow us to start the system, in those cases we will only need to connect our bootable USB already ready and log in through it, and thus see and repair the problem that our original operating system had without much difficulty. This is why these USBs are widely used by computer technicians or anyone whose job is to repair computers.
Very good, since we know what bootable USB is and what it does, now let’s start with the main topic of the article.
Steps to create a bootable FAT32 USB Windows 10
1. The first thing we must do is take the USB device that we are going to use for this purpose (It is preferable that it be at least USB 3.0 to make it faster) and connect it to our computer.
2. Once we have our USB device connected to the computer we go to the Windows search bar where we are going to place `cmd´ once it appears we select it, this will open the command prompt window.
3. In the command prompt window we are going to type the diskpart command. Then we simply press Enter on our keyboard.
4. At the same command prompt we will continue entering the following command `list disk´ and press the` Enter´ key again. Then a new window will open.
5. Here the storage devices that we have in our computer connected will appear, here we will look for the USB device that we connect, in most cases, it can appear as disk 1. But we can easily recognize it if we look at the storage capacities.
6. After we find our device, we will write in the command prompt window `sel disk 1´ (If your USB device appears with the name disk 1, otherwise change that part to the name of the USB device).
7. Again in our command prompt window we enter the command `create partition primary. This will create a main partition on our USB device.
8. We will continue writing the command `list par´. Then we are going to write `sel par 1´. This will allow us to choose the partition that we have just created on our USB.
9. Then we must activate the partition we selected, for this, we only have to enter the command `active ‘.
10. We will continue with the formatting of the USB device. We will do this by writing the command `format fs = FAT32 label =» WINDOWSUSB »quick override´, together and without any special characters or periods, commas, etc.
11. The name that we place will be the one that will appear on the computer at the time we connect the USB. So, you can choose to put a name that is easy for you to remember.
12. Once the above steps are ready, again at the same command prompt. We are going to introduce the command `assing´ here we will assign to our USB the drive letter that it will use. The most used would be F or G. But they can be the ones they want as long as they are not being used by another device installed in the system.
13. To finish the process, we will only write the command `exit´ this will close the diskpart procedure. And then we retype the same command to close the command prompt window.
14. Then to finalize our bootable USB Windows 10, we just have to paste the ISO file of the Windows 10 operating system into our bootable USB. This ISO file can be downloaded from the official page of the Windows 10 operating system. They only need to enter the page and look for the option that allows you to download the ISO. Or, you could simply google `Windows 10 ISO file` and it will appear. Once you have it, just enter your USB device and paste it, just like any other file. That’s how to create FAT32 bootable USB Windows 10.
Well, once all the previous steps have been carried out, you will have a perfect and functional Windows 10 bootable USB. You can use this on any computer by simply connecting to any of the ports that the device has. CPU.
